installation and fi nishing
EN
3.3
rough framing
WARNING
!
•
Select a location that is not prone to moisture and is located at least 36" (91.4cm) away from combustible
materials such as curtains, drapes, furniture, bedding, paper, etc.
note:
Once the rough framing has been prepared and the power has been routed to the right side of the recess, the
appliance may be installed.
The electrical connection must be made prior to placing the appliance into position (see "electrical information"
section).
Have two people lift the appliance into position.
In order to avoid the possibility to exposed insulation or vapour barrier coming in contact with the appliance
body, it is recommended that the walls of the appliance enclosure be "fi nished" (i.e. drywall / sheet rock, etc.)
as you would fi nish any other outside wall of a home. This will ensure that clearance to combustibles is main-
tained within the enclosure.
Wall
11"
(279mm)
Rough Framing
10
W415-1980 / 06.20.19
31 1/4"
(794mm)
35 1/2"
(902mm)
35 1/2"
(902mm)
35 1/2"
(902mm)
50 1/4"
(1276mm)
Rough Framing in a Corner
35 1/2"
(902mm)