Additional Functions; Switching Off The Ir Receiver; Showing The Firmware Version; Dmx Functions - IMG STAGELINE PARL-5RGBW Mode D'emploi

To switch on the DMX mode and to set the DMX
GB
start address:
1) Call up the menu item
2) Use the button UP or DOWN to select the start
address desired (
If the start address does not have to be changed,
the DMX mode can be switched on via the button
DMX on the remote control.
Then the PARL-5RGBW can be operated by
means of the light controller.
Note: A dot will flash on the display when a DMX signal is
available at the DMX input (4).
9

Additional Functions

9.1 Switching off the IR receiver

To protect the spotlight against inadvertent opera-
tion via the infrared remote control, switch off the
infrared receiver:
1) Call up the menu item
The display will indicate the current setting:
: IR reception switched on
: IR reception switched off
2) Use the button UP or DOWN to select the option
desired.

9.2 Showing the firmware version

To show the version number of the firmware (oper-
ating software of the unit):
Call up the menu item
number will appear on the display for a few sec-
onds. Then it will disappear again.
14
.
to ).
.
(version). The version
10 Specifications
Control protocol: . . . . . . . DMX 512
Number of DMX channels: 7
Light source: . . . . . . . . . . 5 × 8 W RGBW LEDs
Beam angle: . . . . . . . . . . 25°
Ambient temperature: . . . 0 – 40 °C
Power supply: . . . . . . . . . 230 V~ / 50 Hz
Power consumption: . . . . 70 VA max.
Dimensions: . . . . . . . . . . . 240 × 180 × 110 mm
Weight: . . . . . . . . . . . . . . 1.5 kg

10.1 DMX functions

DMX value Function
Channel 1: dimmer
0 – 255 total brightness
Channel 2: red component
0 – 255 brightness red
Channel 3: green component
0 – 255 brightness green
Channel 4: blue component
0 – 255 brightness blue
Channel 5: white component, intensity for two-colour effect
if channel 7 = 0 ... 15
0 – 255 brightness white
if channel 7 = 16 ... 95
colour change: significant → slight
0 – 255
Channel 6: stroboscope, speed for programs
if channel 7 = 0 ... 15
0 – 7 no stroboscope
stroboscope: slow → fast
8 – 255
if channel 7 = 96 ... 223
speed: slow → fast
0 – 255
Channel 7: automatic programs, music control
0 – 15 setting via channels 1 – 6
16 – 31 two-colour effect 1
32 – 47 two-colour effect 2
48 – 63 two-colour effect 3
64 – 79 two-colour effect 4
80 – 95 two-colour effect 5
96 – 111 multi-colour stroboscope
112 – 127 colour changes with fade-in and fade-out
128 – 143 sudden colour changes
144 – 159 sudden colour changes with blackout phases
160 – 175 colour changes with fade-out
176 – 191 colour changes with fade-in
192 – 207 colour changes with fade-in and fade-out
208 – 223 colour changes with crossfading
224 – 239 music control SOUND 1
240 – 255 music control SOUND 2
Subject to technical modification.