Uline H-1030 Mode D'emploi page 9

ValVe and tube o-ring replaceMent
1. loosen screws with a flat screw driver. (see Figure 20)
2. Remove spring with needle-nose pliers.
(see Figure 21)
Figure 20
Figure 22
PAGE 9 OF 20
operating instructions continued
c-ring
3. Remove c-ring with c-ring pliers. (see Figure 22)
4. Remove valve and tube with needle-nose pliers.
(see Figure 23)
Figure 21
Valve and tube
Figure 23
0514 IH-1030