Using The Handset As An Alarm Clock; Baby Monitor - Gigaset Widex W570 A Mode D'emploi

Gigaset W570A / LUG US en / A31008-M2728-R331-1-3S19 / applications_LUG.fm / 1/29/19

Using the handset as an alarm clock

Activating/deactivating the alarm clock
The time is set
¤
Menu
After you activate the alarm clock, the menu for setting the wakeup time opens automatically.
Setting the wakeup time
¤
Menu
OK Enter wakeup time
If the alarm clock is activated, you will see the
display and the wakeup time after it.
The wakeup time is shown in the display only when all
calls in the call lists have been read and messages on
the answering machine have been listened to.
Setting the alarm clock signal
¤
Menu
Switching off/repeating the alarm after an interval (snooze mode)
Prerequisite: An alarm call sounds.
¤
Deactivate until the next alarm call: Press Off.
Or:
¤
Snooze mode:
Press Snooze or any key. The wake-up call is deactivated and then repeated after 5 minutes.
Or:
Press nothing. The alarm call is deactivated after 60 seconds and then repeated after
5 minutes. After the fourth repetition, the alarm call is deactivated for 24 hours.

Baby monitor

When the baby monitor is switched on, the stored (internal or external) destination number is
called as soon as a defined noise level is exceeded in the vicinity of the handset.
In baby monitor mode, incoming calls are only signalled on the display (without ringtone). The
display backlight is reduced to 50%. Advisory tones are deactivated.
If you accept an incoming call, the baby monitor mode is suspended for the duration of the call,
but the function remains activated. The baby monitor mode is not deactivated by switching the
handset off and on again.
en fr es
page 12).
(
Alarm Clock OK
Alarm Clock OK
OK
Alarm Clock OK
Availability and operation of the functions
may differ on your telephone.
Using the handset as an alarm clock
Activation OK ( = on)
Wake-up Time
icon in the
Signal OK (
07:15
10:50
Menu
= on)
39