Imetec P5001 Mode D'emploi page 31

WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.
BLADE HEAD
• Switch the appliance off and disconnect the power supply unit plug
(11).
• Remove the adjustable comb (5 or 6) by pressing the comb release
buttons (7) and removing it from the appliance.
• Press the centre of the blade head (4) with your thumb until it opens
[Fig. B1], and then remove it from the appliance.
• Do not drop the blade head (4).
• Clean the blade head (4) and the interior of the appliance with the
brush provided [Fig. B2, B3].
• Insert the lock tab of the blade head in the slot and push the head
until it clicks into place [Fig. B4].
28
EN