LG ADFD544 Série Manuel D'utilisation page 45

Problem
Thermistor failure.
tE
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
Motor trouble
LE
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
Vario motor trouble
NE
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
The Download Cycle is selected.
, , ,
P1 Pz P3 P4
• This is not an error code. This code indicates the current Download Cycle.
Test mode is selected.
#, #, #, #
N: U: d: t
• This is not an error code. This code is used when testing the dishwasher. Power the unit off
(# is a number.)
Rinse aid level setting mode is selected.
, , , ,
LO L1 Lz L3 L4
• This is not an error code. This code indicates the current rinse aid level. For more
Control Lock is activated.
CL
• This is not an error code. This code indicates that the control lock is activated. Press and
Operation
Problem
Dishwasher will not Start button is not pressed.
operate.
• Press the Start button.
Door is not completely closed.
• Make sure that the door is completely closed and latched.
Power supply or power supply line is not connected.
• Connect the power supply or power supply line properly.
Fuse is blown or circuit breaker tripped.
• Replace the fuse or reset the circuit breaker.
Control Lock is activated.
• Deactivate Control Lock.
Dishwasher operates Dishwasher is connected to cold water.
too long.
• Check the water supply connection or water heater setting. (Heating cold water takes
Water remains in tub Drain hose is kinked or clogged.
after completion of
• Adjust hose or clear blockage.
cycle.
888-542-2623 (Canada).
888-542-2623 (Canada).
888-542-2623 (Canada).
and on and the code will disappear.
information, refer to the Adding Cleaning Agents section.
hold Half Load and Energy Saver simultaneously for three seconds.
longer.)
Possible Cause & Solution
Possible Cause & Solution
TROUBLESHOOTING 45