Maintenance And Cleaning; Storage - Imetec Q9601 Mode D'emploi

(2) stops flashing.
• Use one hand to pull the lock of hair, insert it between the heated parts
(1,8 and 8a), close the product and hold it pressed for a few seconds.
Repeat the styling operation along the entire length of the hair.
EN
• After hair styling has been completed, switch the appliance off by
sliding the button (3) right to 0 and disconnect it from the socket.
• Wait for the appliance to cool down.
• Use the specific closing lock (5) to close and store the styler.
o n .

MAINTENANCE AND CLEANING

• Disconnect the appliance from the mains.
• Make sure the appliance is cool.
• Clean the external and internal surfaces of the heated parts
(1,8,8a) and the handle of the appliance using a soft and damp
cloth.
• Let it dry completely before switching it on again.
CAUTION! Every time you need to
place the appliance down during
styling operations, do so with the
support base with feet (7) facing
down.
WARNING! Always disconnect the
appliance from the socket before
cleaning or performing maintenance.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.

STORAGE

WARNING! Risk of fire. Wait for the
appliance to cool completely before
storing it.
WARNING! DO NOT wrap the supply
cord around the appliance.
14