Ksenia ergo M Manuel Utilisateur page 19

ESC KEY
The ESC key allows to exit the current menu, and go back to the previous
level. This means that, whether in a branched menu, repeated clicks on the
key will be needed to get back, for example to main menu.
A two seconds pressure on the 'Esc' key when the keypad is in idle allows
the activation of the cleaning function. As the name suggests, this function
disable the keypad functionality for front-cleaning purposes.
During the keypad block due to the activation of the cleaning function, the
following information will be displayed on the "ergo" screen:
• First line: "Keypad block"
• Second line: the time for the cleaning will be marked by an increasing dot
line, moving from left to right. When the line will be filled up the ergo S
(ergo M) will be ready to accept commands again.
ENTER KEY
The Enter key allows to enter the expected menu when browsing, to start
editing during configuration phase or to confirm the input of a data during
an editing session.
How the enter key works:
When browsing the main menu, a pressure on the Enter key allows to enter
the submenu and to keep exploring in case the menu has several branches.
When visualizing the configuration data, a push on the Enter key permits
the editing of the data itself and this involves:
• the configured object flashes if it is selectable with a predefined set
through the Scroll;
• the first character of a string flashes in case the string is being edited;
• the first number flashes when a numeric data or a phone number is being
edited.
During the editing, a further pressure on the ENTER key can confirm the
value or modify it and the ergo S (ergo M) display will show: the following
data, the subsequent menu or the value itself. Once confirmed the new
value will be sent to lares 4.0 and stored.
19
EN