Contrast Adjustment - Ksenia ergo M Manuel Utilisateur

CONTRAST ADJUSTMENT

Pressing keys "Left" or "Right" when keypad is in idle, a sliding bar used for
contrast adjustment will be enabled. The ENTER key will store the new
contrast value, the ESC key will leave value unchanged.
EN
Values will change on a 3 seconds key holding.
RFID AREA
The keypad is provided with an internal antenna that allows to detect any
device that fits the RFID.
KEYPAD
It is conceived for data-entering (numbers/characters) during the
configuration process, PIN entering (programmer or user), etc. By touching
or exerting a slight pressure on the area corresponding to the desired
number, it allows to enter alphanumeric characters (letters and symbols) in
addition to 0-9 numbers, depending on the operating context (menu). This
is possible because the keypad is provided with the typical mobile phone
mode technology, which allows to change the entered character
depending on the settings (refer to the following key characters match
table). Two ways to move forward the display line are possible while
entering a text: using another key or avoiding touching any key for 3
seconds after the last type.
Keys - Characters match table
0 ( ) / % - _ # *
1 " " 'space' ? ! , . \ ' &
2 A B C a b c 2 $ @
3 D E F d e f 3 ; <
4 G H I g h i 4 = >
5 J K L j k l 5 [ ]
6 M N O m n o 6 { :
7 P Q R S p q r s 7
8 T U V t u v 8 + }
9 W X Y Z w x y z 9
18