Diagnostic Messages - Batavus ION Mode D'emploi

7

Diagnostic messages

Contact the bicycle repair shop if the message is not listed in the manual.
Message Diagnosis
E01 Battery pack flat
E02 The battery pack has
become too hot or cold
while charging
E04 Bicycle connected to the
battery charger
E07 Motor outside
temperature range
E13 Display does not respond
correctly
E14 Display is not recognised
E15 Deviation in the charging
management
78
Solution
Charge the battery pack.
Wait until the battery pack is
within the temperature range
(see § 1.2.4 and § 5.1). The
charging will then
automatically continue.
Disconnect the battery
charger from the bicycle.
Wait until the motor has
reached the proper
temperature.
This message may occur
while positioning/removing the
display. Take your bicycle to
the bicycle repair shop.
The display needs resetting.
Take your bicycle to the
bicycle repair shop.
Connect the bicycle to the
battery charger and wait until
76