Hansgrohe Metris S 31161 1 Série Instructions De Montage / Mode D'emploi / Garantie page 4

1
2
3
4
English
Installation
Install the drain pull rod.
Place the faucet, escutcheon, and sealing ring on the
mounting surface.
Install the fiber washer, friction washer, and mounting
nut.
Tighten the mounting nut by hand.
Tighten the tensioning screws.
Connect the hoses to the stops.
Install the drain.
Turn on the water and check all connections for leaks.
16 mm
9 mm
Do not allow the supply hoses to
twist.
Twisted supply hoses may be-
come loosened from the faucet,
which may cause water damage.