Manual Release - Hammar H20 Manuel D'utilisation

MANUAL RELEASE

In order to launch the liferaft manually,
release the sliphook and throw the liferaft
overboard. The liferaft is now attached to
the vessel by the painter line via the Red
Weak Link™ connector. Pull the painter
line and inflate the liferaft so the survivors
can board.
"Easy release" – Manual release hook
In order to launch the liferaft manually, re-
lease the manual release hook and throw
the liferaft overboard. The liferaft is now
attached to the vessel by the painter line
via the Red Weak Link™ connector. Pull
the painter line and inflate the liferaft so the
survivors can board.
APPROVALS
The Hammar H20 hydrostatic release units
are approved all over the world, fulfil the
requirements of the SOLAS 74 Conven-
tion, IMO Res. MSC 97(73)8.1/8.6 (2000
HSC Code), IMO Res. MSC. 48(66), IMO
Res. MSC.81(70), IMO MSC/Circ.811,
approved to EU Directive 96/98 EC on
Marine Equipment and has a Nato stock
number. Release depth 1,5 – 4,0 metres
according to IMO/SOLAS regulations. The
required certificates can be downloaded
from our web-site: www.cmhammar.com
5