Overload Protection - Sage Super Q SBL920 Guide Rapide

• Be careful when handling and
cleaning blades, as they are
very sharp. Mishandling of the
blades may cause injury.
• Avoid putting the cup or jug on
the motor base while the motor
is still spinning.
• Do not operate without any
ingredients in the cup or jug.
• Never attempt to operate
with damaged blades, or with
utensils, or any foreign objects
inside the cup or jug.
• Do not put the cup or jug in
extremes of heat or cold, for
example placing a cold jug
into hot water, or vice versa.
• Lid must be firmly secured to
the jug before operation
to ensure internal contents do
not escape, spray or overflow.
• Do not remove the jug from
the motor base while blender
is in use.
• Use only the blender jug and
lid, cups, blade assembly and
accessories that are supplied
with this blender. The use of
attachments, or accessories not
manufactured or specified by
Sage may cause the risk of fire,
electrical shock, or injury.
• Do not use blender while

OVERLOAD PROTECTION

is flashing on the LCD. If this
occurs, unplug the blender and
wait for 30 minutes until the
motor has cooled. Once cooled,
you will be able to use the
blender as usual again.
4
• Be careful if hot liquid is poured
into the blender, as it can be
ejected out of the jug due to
sudden steaming.
• When blending hot liquids
ensure inner measuring cap is
in place. Cap will protect from
splashing of hot liquids during
blending and includes vents
designed to relieve pressure
and avoid steam build up.
• Be careful removing the lid after
blending hot liquids, as steam
traps can form in the liquid and
be ejected out of the jug.
• Strictly observe the reduced
capacity limit for blending
hot ingredients.
• Failing to follow this instruction
may cause personal injury by
hot liquid burn.
• Never blend hot ingredient/
liquid using the vacuum
blending feature.
• (Vacuum blending is an optional
feature achieved through
using the Sage vacuum pump
supplied separately).
• Never use attachments
or accessories that are not
supplied with this product
or authorised by Sage to be
used on this product. Failing
to follow this instruction may
cause product malfunction,
product damage or even pose
safety risk.