Pioneer SGX-CA500 Mode D'emploi page 61

Message
The built-in flash memory format failed. When the built-in flash memory format failed, this
Storage space is getting low.
Range of the valid value is XXX - YYY When you input the value outside a setting range,
Cause
message is displayed.
If the remaining memory in the system area is
less than 100MB, this message is displayed every
minute.
this message is displayed.
About Error Messages
Solution
If the logging, timer reset, or setting manager
(initializing, backup, or restore) is in progress, retry
the memory format after finishing each command.
In the other cases, wait for a while, and then retry
to format the memory.
Reset the ride log data.
Input the value within a setting range.
EN
61