Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MICROWAVE HOOD COMBINATION SAFETY
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Measuring tape
Pencil
Box cutter
No. 3 Phillips screwdriver
Drill
1¹⁄₂" (3.8 cm) diam. hole drill
bit for wood
2
Your safety and the safety of others are very important.
INSTALLATION REQUIREMENTS
Tools and Parts
2 mm drill bit
3/4" (19 mm) hole saw
Keyhole saw
Duct tape
Level
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
Materials needed
Standard fittings for venting. See "Venting Requirements"
section.
Publicité
Table des Matières
