TRAMPOLINE COVER PAD ASSEMBLY
The trampoline is almost complete, with all the springs in place. Before using the
trampoline please attach the provided safety pads.
Lay out the two sides of the safety pad shown
1.
here and connect with the attached velcro
strip.
Lay out the other two pads and connect
2.
with velcro.
3.
Tie all the cover pad strings onto the top rail
of the trampoline. The middle of the pad has
a set of strings with two S-shaped hooks at
the end. Attach one S-shaped hook to the
springs of the mat, and the other S-shaped
hook to the V-rings of the mat. Attach the
hooks from underneath the mat.