Sony KV-36FS100 SCC-S65H-A Mode D'emploi page 90

Connecting a TV, Satellite Receiver, and VCR
1
Satellite Receiver
1
Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR.
3
Using a coaxial cable (not supplied), connect the OUT jack on your VCR to the VHF/UHF jack on
your TV.
4
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite receiver to
AUDIO/VIDEO IN on your VCR.
5
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
✍
To view from the satellite receiver or VCR, select the video input to which your satellite receiver or
VCR is connected by pressing
4
From
cable/
antenna
VCR
5
on the remote control.
Connecting Your TV
Rear of TV
1 3 4
2
3
Video (yellow)
Audio L (white)
Audio R (red)
13