Using The Timer Menu; Current Time - Sony KV-36FS100 SCC-S65H-A Mode D'emploi

Using the Timer
To access the Timer menu, refer to the following steps:
To Display To Highlight
Set your TV to the current day and time. Press

Current Time

1
2
✍
You must set the Current Time before you can use Timer 1 or Timer 2.
Use the timers to program your TV to turn on and off by day, time, duration and
Timer 1 and
channel. The timers duration is maximum of 6 hours. When the channel is fixed,
Timer 2
Scheduled it is not necessary to set the channel.
viewing
1
2
3
✍
Select Off to turn off the Timer (your previous settings will be saved).
✍
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of
any loss of power, Current Time, Timer 1 and Timer 2 settings will be cleared.
Menu
To Select
Use the F or f buttons to enter the correct day and time, then press
Press to exit the menu.
Use the F or f buttons to select Timer 1 or Timer 2, then press
Use the F or f buttons to enter the desired day, start time, duration, and
channel, then press
has been set, and the timer light on the front panel of the TV should be
turned on.
Press to exit the menu.
Video
Timer 1 : Off
Timer 2 : Off
Current Time
Program the time
Move:
to open Current Time menu:
. The timer status should be On when the Timer
Using the Menus
Audio Channel Parent Timer Setup
Program
:
Select: End:
.
.
Basic
AM
35