Indicator Light - Pando PVMAV 45-18 Manuel D'utilisation Et Installation

INOXPAN S.L.
· FOR DOUBLE ZONE
POWER To turn the appliance off, lightly touch and hold the key for 5 seconds until
temperature display goes out. To turn the appliance on, lightly touch and hold the key for
1 second until temperature display lights up.
NOTE: Pressing the button once will disconnect the audible alarm if it is on.
LIGHT Used to turn the internal light on/off.
UP Used to increase the temperature in 1° C steps.
DOWN Used to lower the temperature in 1° C steps.
ILLUMINATED DISPLAY Shows the temperature and other services.
The upper refrigeration zone.
The lower refrigeration zone.

INDICATOR LIGHT

The indicator light is the dot on the lower right-hand side of the screen. The indicator light turns
on when you select the multi-key function. To carry out this function, keep the first key
pressed, press the pause key for at least 5 seconds and then release all keys.
DEGREES ºC/ ºF SELECTOR
Select the temperature display in degrees Fahrenheit or Centigrade. To change the option,
keep the LIGHT key pressed for 5 seconds.
TEMPERATURE CONTROL ADJUSTMENT
The unit has two independent temperature zones. The temperature of both zones can be
adjusted from 5ºC to 20ºC (41ºF to 68ºF). The LOWER temperature zone is ideal for storing
white and red wine from 13° C to 20° C (55° F to 68°F). The UPPER temperature zone is ok
for white wine from 5° C to 13° C (41° F to 55° F).
• When the unit is plugged in for the first time it will start with the factory pre-set values. The
temperature programmed in the factory for the upper temperature area is 8ºC (46ºF) and for
the lower temperature zone is 12ºC (54ºF).
• Press the keys on the left UP and DOWN to control the internal temperature of the upper
temperature zone and press the keys on the right up and down to control the internal
temperature of the lower zone. If both keys are pressed at once the screen will display the
last predetermined temperature.
22
WINE CABINETS