Publicité
ENGLISH
Use the • and ª cursor buttons to select the desired setting.
q When "TV ASPECT" is selected:
Press the ENTER button several times and select the aspect.
4:3 PS (Factory default)
Select this to play wide DVDs in the pan & scan mode
(with the sides of the picture cut off). Discs for which pan
& scan is not specified are played in the letter box mode.
4:3 LB
Select this to play wide DVDs in the letter box mode
(with black strips at the top and bottom).
WIDE (16:9)
Select this to play wide DVDs in the full-screen mode.
w When "TV TYPE" is selected:
Press the ENTER button several times and select the type.
PAL (Factory default)
Select this when your TV's video format is PAL.
If PAL is selected, output format is fixed to PAL.
NTSC
Select this when your TV's video format is NTSC.
If NTSC is selected, output format is fixed to NTSC.
MULTI
Select this when your TV is compatible with both the
NTSC and PAL formats.
If you play the disc recorded NTSC format, signal from
video output terminal will be switched to NTSC is
selected, output format is fixed to NTSC.
e When "VIDEO OUT" is selected:
Press the ENTER button several times and select the video out.
S-VIDEO (Factory default)
Video signals are output from the S-VIDEO output connector.
3
COMPONENT
Video signals are output from the color component
output connectors.
RGB
Video signals are output from the 21-pin SCART connector.
* The VIDEO OUT setting cannot be made when "P.SCAN"
is lit on the front panel display. Press the "PROGRESSIVE
SCAN" button on the front panel to turn off "P.SCAN"
r When "VIDEO MODE" is selected:
Press the ENTER button several times and select the video mode.
AUTO (Factory default)
The set identifies the type of material on the disc being played
(film or video) and selects the mode automatically. This mode is
suited for playing discs containing both film and video material.
FILM
This mode is best suited for playing discs containing
film material or video material recorded with the
progressive scan method.
VIDEO
This mode is best suited for playing discs containing
video material.
t When "SLIDE SHOW" is selected:
Press the ENTER button several times and select the
slide switching interval.
The time interval can be set within 5 and 15 seconds.
(The factory default setting is 5 seconds.)
NOTE:
• If stripes of noise appear on the picture or the picture is
unclear when playing a specific DVD video disc, try
changing the video mode.
To exit the setup mode
Press the RETURN or SETUP button.
14
When "AUDIO SETUP" is selected
Remote control unit
Remote control unit
VIDEO SETUP
TV ASPECT
4 3 PS
TV TYPE
MULTI
VIDEO OUT
S-VIDEO
VIDEO MODE
AUTO
SLIDE SHOW
5 SEC
SELECT
SET ENT ER BUTTON
1
SET TV ASPECT
VIDEO SETUP
4 3 PS
TV ASPECT
TV TYPE
MULTI
VIDEO OUT
S-VIDEO
VIDEO MODE
AUTO
SLIDE SHOW
5 SEC
SET ENTE R BUTTON
SELECT
2
SET TV TYPE
VIDEO SETUP
TV ASPECT
4 3 PS
TV TYPE
MULTI
VIDEO OUT
S-VIDEO
VIDEO MODE
AUTO
SLIDE SHOW
5 SEC
SELECT
SET ENTE R BUTTON
SET VIDEO OUT
VIDEO SETUP
TV ASPECT
4 3 PS
TV TYPE
MULTI
VIDEO OUT
S-VIDEO
VIDEO MODE
AUTO
SLIDE SHOW
5 SEC
3
SET ENTE R BUTTON
SELECT
SET VIDEO MODE
VIDEO SETUP
TV ASPECT
4 3 PS
TV TYPE
MULTI
VIDEO OUT
S-VIDEO
VIDEO MODE
AUTO
SLIDE SHOW
5 SEC
SELECT
SET ENTE R BUTTON
SET SLIDE INTERVAL TIME
TOP MENU
/PBC
2,3
ANGLE
DISPLAY STOP STILL /PAUSE
SLOW/SEARCH
SETUP NTSC/PAL ZOOM SLIDE SHOW
1
See page 12.
Use the • and ª cursor buttons to select the desired
setting.
DIGITAL OUT
Use this to select the digital output's signal format.
96k LPCM OUT
Use this to set the digital audio output when playing DVDs
recorded in linear PCM audio.
DOWNMIX
Set this when connecting the unit to a stereo device.
COMPRESSION
Use this to set the dynamic range output when playing
discs.
q When "DIGITAL OUT" is selected:
Press the ENTER button several times and select the
output format.
NORMAL (Factory default)
When playing DVDs recorded in Dolby Digital or DTS,
bitstream signals are output from the digital audio
output terminals. When playing DVDs recorded in linear
PCM, linear PCM signals are output.
Select "NORMAL" when making digital connections to
an AV amplifier with built-in Dolby Digital and DTS
decoder.
PCM
When playing Dolby Digital bitstream signals or DVDs
recorded in linear PCM, the signals are converted into
48 kHz/16-bit PCM (2-channel) signals and output from
the digital outputs. When playing DVDs recorded in
PCM, linear PCM signals are output.
RC 963
MENU
ENTER
RETURN
PLAY
SKIP
Remote control unit
Remote control unit
AUDIO SETUP
DIGITAL OUT
NORMAL
96K LPCM OUT
96K
DOWNMIX
LT/RT
OFF
COMPRESSION
SET ENTER BUTTON
SELECT
SET DIGITAL OUT
Remote control unit
Remote control unit
AUDIO SETUP
DIGITAL OUT
NORMAL
96K LPCM OUT
96K
DOWNMIX
LT/RT
COMPRESSION
OFF
SELECT
SET ENTER BUTTON
SET DIGITAL OUT
Publicité
Chapitres
