entrematic Ditec Traffic C Manuel D'installation, D'entretien Et D'utilisation page 40

ADJUSTMENTS AND SIGNALS
52E
Trimmer
P1
0 s 30 s
P2
0 s 10 s
P3
0 MAX
P4
0 MAX
P5
0 MAX
Dip-switches
DIP 1 Future use
DIP 2 Access to advanced menu
DIP 3 Trimmer enabling
Counter
DIP 4
TOT: Number of operations
SVC: Number of operations left until service
DIP 5 Access to service menu
Door operating data display
DIP 6
(F working, I Bus, I peak, V Bus)
DIP 7 Future use
DIP 8 Future use
LED
DL2 Closing position
DL3 Deceleration
DL6 Partial opening
DL7 Opening position
DL15 Autostart
Button
Starts the opening
ON
operation.
Starts the partial
opening operation.
Starts and stops the
STOP operation.
Starts the closing
operation.
0DT829 2016-04-01
NOT USED
NOT USED
NOT USED
NOT USED
Adjustment of display contrast.
Description
On
- The green LED on indicates the presence of the 24 V= power
supply.
- The red LED on indicates that the STOP has been activated.
- The flashing red LED indicates that the safety devices have been activated.
- The quick flashing red LED indicates that the service threshold has been
reached
Description
OFF
–
Disabled.
Disabled
Disabled
Disabled
Disabled
–
–
Buttons
S2 USED FOR PROGRAMMING
S3 NOT USED
S4 NOT USED
S5 USED FOR PROGRAMMING
Standard
Operating
LED
- 40 -
ON
–
Enabled
Enabled
Enabled
Enabled
Enabled
–
–
Description
Programming
Operating
Button
Menu scrolling
Confirm
Menu scrolling