Safety Instructions For Installation - Kemper MULTI-THERM 141 Instructions De Montage

EN
Installation and use
Read the manual carefully and follow the instruc-
tions before installation!
Warning! Installation and maintenance must be
carried out by qualified plumbers.
Warning! Priority must be given to the national
standards and provisions on Health and Safety
Regulations.
Use
The MULTI THERM Automatic Double-Regulating
Valve is used for the automatic regulation of hot
water circulation via thermostat element. The
product must only be used for this
purpose.
Only use the Automatic Double-Regulating Valve
- in sound condition.
- as intended.
Warranty
Warranty or liability are voided through:
- Disregard of installation instructions.
- Damage due to faulty installation.
- Unauthorised product modifications.
- Other incorrect operation.
Warning information
Please read and follow the warning information in
this instruction. Disregard of the warning informa-
tion may lead to injury or material damage!
Labelling of important warning information:
Warning! Highlights risks that may
result in injury, material damage or
contamination of drinking water.
Note! Indicates hazards that may lead
to damages to the system or malfunctions.

Safety instructions for installation

© www.kemper-olpe.de – 02.2022 / K410014100002-00 – 7 /32
Important notes for the system operator
Thermal desinfection
The valve is suitable for the thermal disinfection (T
> 70 °C) of sanitary installations. When the tem-
perature rises to T > 70 °C, the valve automatically
switches to the thermal disinfection setting.
International approvals
DVGW
ÖVGW
SVGW
Water-
Mark
KTW /
W270
Norms
DVGW W 551
DVGW W 553
DIN 1988-300
Disposal
Local regulations on waste recycling
and disposal must be followed. The
product must not be disposed of with
household waste but must rather be
disposed of appropriately.
WRAS
KIWA
VA
ÜA
WSD