Accessories - Kemper MULTI-THERM 141 Instructions De Montage

EN 2 2
Marker arrow
Rotary shutt-off
cap
3

Accessories

Dial Thermometer
3.1

Figure T5100 150 00
Remove rotary shut-off cap and insert thermome-
ter into the provided hole as far as it will go.
To relay the temperature to a building services
control system, a Pt 1000 temperature sensor,
instead of the thermometer, can be inserted in the
hole.
Filling and drain valve:
3.2

Figure J7109 173 00
(For 1/2" hose with 3/4" union nut) Unscrew plug
from drainage connection. Screw drain valve into
place and tighten.
Turn adjustable ring on drain valve to „Zu"
(Closed) position (clockwise). For drainage, connect
hose and turn to „Auf" (Open) position.
10 /32 – K410014100002-00 / 02.2022 – © www.kemper-olpe.de
Adjustment of set-point temperature
Locking screw M5
Adjusting cap
Material: PE material, fire safety class B1 to DIN
4102, Part 1.
The one-piece, closable insulating shell can be fas-
tened by means of the clips included in the scope
of supply or cemented in place using commercially
available adhesive.
•
•
•
•
•
Insulating shell:
3.3

Figure 471 11
Temperature sensor Pt 1000:
3.4

Figure T5100 140 00
Pt 1000, T = 0 - 100 °C
4-Leiter
Toleranzklasse A
Anschluss 2 m, 4 x 0,35 mm²
konfektioniert
Balancing head
Plug
Hex key size 2,5 mm