Klarstein 10035059 Mode D'emploi page 27

On/Off
• Press the on/off button (20) to switch the unit on or off. If you turn the unit off while
it is in automatic mode, the unit will run according to the default settings.
• If you want the unit to remain off for a long period of time, you must first set the unit
to manual mode and then turn it off. If the appliance is outside the operating time
you have set, the appliance will be turned off within one second after pressing the
power button (20).
Setting the heating power
• Press the heat output button (2) to set the heat output to low or high.
• When the heat output is high, „HI" (5) is displayed on the screen and when the heat
output is low, „LO" (4) is displayed on the screen.
Manual mode and automatic mode
• Push the change button (19) to switch between manual and automatic mode.
• In manual mode, the screen displays „M" (7).
• In automatic mode, the screen displays „A" (8).
Reminder function
• Press the on/off button (20) to switch the unit off and on. The last set temperature is
reset when the appliance is switched on again.
• Both the manual and automatic modes have the reminder function.
• If the appliance is unexpectedly switched off or there is a power failure, only the
power indicator (1) will light up when the power is switched on again and the
appliance will remain switched off.
• Press the power button to turn the power back on. The appliance automatically
restores the last mode set.
Delete
• Press the OK button (12) for 5 seconds. When a beep is heard, all the timer settings
you have made have been cleared.
EN
27