Installation Instructions; Safety Symbols - HEIDENHAIN QUADRA-CHEK ND 1100 Guide D'installation

ND 1100 QUADRA-CHEK

Installation Instructions

Operating Instructions available at www.heidenhain.de
3. Safety
The following messages provide safety information for preventing personal injury and
product damage:
Read and understand these instructions before use to avoid the possibility of
personal injury or death.
Hazardous live parts may be exposed if the unit is opened. Do not open the
unit. There are no serviceable items inside.
The protection provided by the equipment may be impaired if used in a manner
not specified. Do not use this product in any way other than its intended use.
Notice
For safety, operation and handling of the unit, keep this document for future
reference.
4. Specifications
The ND 110x QUADRA-CHEK is an advanced evaluation unit suited mainly to positioning
tasks on positioning equipment and measuring fixtures. Use the ND 1100 QUADRA-CHEK
on measuring equipment and measuring machines for data acquisition and relaying to a
PC. This unit is designed for indoor use only. The ND 1100 QUADRA-CHEK components
shall only be installed as described in these instructions. Mounting, installation and
maintenance are to be performed by qualified personnel only.
Power input:
Replaceable fuses:
Environmental conditions
Operating temperature:
Storage temperature:
Relative humidity:
Altitude:
Protection:
Overvoltage category:
Pollution degree:
Mass:
12
AC 100 V ... 240 V (-15 % ... +10 %)
50 Hz ... 60 Hz (±3 Hz)
(max. 100 W)
T 1.6 A / 250 V, 5 mm x 20 mm,
Quantity: 2
0 °C ... 45 °C
-20 °C ... 70 °C
† 80 %
† 2000 m
IP00, front panel IP40
II, equipment intended to be supplied from the
building wiring
2
ND with stand: approx. 4.8 kg
ND with mounting adapter: approx. 2 kg

Safety symbols

Where the following safety symbols
appear on the product they alert you to
important safety information.
Symbol description
Refer to the accompanying
2
information or documentation
to protect against personal
injury or damage to the unit
Earth (ground) terminal
6
Power switch "On (supply)"
3
position
Power switch "Off (supply)"
3
position