General Information; Mounting Instructions - HEIDENHAIN LC 115 Instructions De Montage

Retain the encoder ID label.

General information

NOTICE
Mounting and commissioning is to be conducted by a
qualified specialist under compliance with local safety
regulations.
– Do not engage or disengage any connections while
under power.
– Encoders that have contributed to the failure of a
safety function in the application are to be returned to
HEIDENHAIN Traunreut.
– Encoders may only be repaired by trained HEIDENHAIN
technicians.
Adhere to the information in the Linear Encoders (ID
571470) brochure to ensure the correct and intended
operation of the encoder.
In addition to this, the machine manufacturer or designer
himself must define the other data required for final
assembly for the respective application.
In safety-related applications, an anti-rotation lock is to be
used for screws.
When fastening the screws, the permissible mounting
temperature of approx. 15 °C to 35 °C must be observed.
Accessories are to be ordered separately, see brochure: Linear
Encoders (ID 571470)
Dimensions in mm
HEIDENHAIN | LC 115/LC 195S | Mounting Instructions | 12/2019 | en
Montageanleitung
LC 115
LC 195 S
Absolutes Längenmessgerät
10/2015
743390-01 / de
The encoder complies with the fundamental requirements of
the standards
– EN ISO 1389-1: 2008
– EN 61508
– EN 61800-5-2

Mounting Instructions

LC 115
LC 195S
Absolute Linear Encoder
9