Klarstein HOT SPOT CV20 Mode D'emploi page 17

C: : Normal Open Mode: Light Icon
This mode can only be set for temperature and working position.
1. Switch to the weekly timing mode if timing is needed, and find out the
corresponding day to set up the working time (digital display area). The working
position (low level
in front is current temperature, two digital display behind is setting temperature,
display temperature 0-80, setting temperature 5-40).
2. 24 hours of the day should be set to work if no timing is needed.
Child lock:
1. Long press , all keys are locked when the lock mark lighting on the screen.
2. Long press all keys are unlocked when the lock mark off on the screen
Windows Open function
The Icon will be lit when the environment temperature is suddenly lower than room
setting temperature.
, high level ). The temperature (two digital display
EN
17