Operation - Klarstein HOT SPOT CV20 Mode D'emploi

EN
16

OPERATION

Caution: Danger of burns
Do not touch the heater during heating operation. The housing gets hot.
Operation for Touch Control
1 Minute button
2 Hours button & Mode switched
3 Weekly button &Function selection
4 Power button
5 Temperature up & Timer open
6 Temperature down & Timer close
7 Display
The product has 3 modes:
A : Normal Closed Mode: Light Icon
In this mode, you can set 1. Week 2. Hour 3. Minute.
Method of Operation: Select
,to set hour, long press
B: Weekly Timing Mode: Light Icon
In this mode, the working state and closing state of the following period can be set:
1. 1. Mon. To Fri. 2. Mon. To Sat. 3.Every day 4. Mon., Wed., Fri. 5. Tues., Thur., Sat.
6. Weekend 7. Mon. To Wed. 8. Thur. To Sat. 9. All Normal Open. Under each
setting, work or closing time can be set separately.
2. Method of Operation: Select
then make use of
timing mode. After one of the modes is selected, set the working position in turn,
touch ,to shift high and low power. Touch
each click for an hour. Touch
hour..
.
, on the panel to switch to
to set minute, long press
.
on the panel to switch to
, to switch to one of the 9 working modes under the weekly
, to set closing time, which is each click for an
be lighting, long press
, to set week.
be lighting, and
,to set working time, which is