Timer Function; Use; Setting The Off Timer; Setting The On Timer - Boneco F225 Mode D'emploi

10

TIMER FUNCTION

en

USE

The timer function lets you determine how long the
BONECO F225–F235 should run before it switches off
automatically (OFF timer).
Alternatively, you can specify a time period for the appli-
ance to wait before switching on automatically (ON timer).
For example, you can use this function to ensure that the
BONECO F225– F235 will switch itself on before you re-
turn home. When you get back, you'll have the perfect
home climate waiting for you.

SETTING THE OFF TIMER

Switch on the appliance using the  button.
1.
2. Select the desired fan level.
3. Hold the  button for 3 seconds until the indicator
«0h» flashes in the display.
4. Use the controller to set the hours until switch-off.
After approximately 5 seconds without input, the
selected value is accepted and the TIMER symbol is
shown on the display.
The appliance runs for the specified period before switch-
ing off.
5. To terminate the timer early, hold the  button for
3 seconds and select «0h». Alternatively, you can
switch off the appliance using the  button.

SETTING THE ON TIMER

Switch off the appliance using the  button.
1.
2. Hold the  button for 3 seconds until «0h» flashes
in the display.
3. Use the controller to set the hours until switch-on.
After approximately 5 seconds without input, the se-
lected value is accepted and the remaining duration
in hours is shown on the display.
4. Select the desired fan level.
The appliance switches on after the defined time and op-
erates at the selected fan level.
5. To deactivate the ON timer early, hold the  button
for 3 seconds and select «0h». Alternatively, you can
switch on the appliance using the  button.