Niko 05-711 Mode D'emploi page 57

05-711
➊ ECG terminals
➋ 230V~ power supply terminals
➌ programming button
➍ programming LEDs
➎ input LEDs
fig. 1
If everything has been connected correctly and the power is switched
on, all LEDs light simultaneously for 1s. You can now manually control
the connected lighting by means of the 'select' button. The 'select'
button then functions as a 1-push button control.
EN
➏
➌
➍
➑
➏ load LED
➐ 'select' button
➑ control terminals
➒ 1-10V OUT terminals
➋ ➊
➎
➐
➒
57