Labels And Symbols; Intended Use Of This Power Tool - Evolution EVOMAG 28 Manuel D'utilisation

www.evolutionpowertools.com
(1.8)
LABELS & SYMBOLS
WARNING: Do not operate this machine if
warning and/or instruction labels are missing
or damaged. Contact Evolution Power Tools
for replacement labels.
Note: All or some of the following symbols
may appear in the manual or on the product.
SYMBOL DESCRIPTION
V Volts
A Amperes
Hz Hertz
Min Speed
-1
~
Alternating Current
n o No Load Speed
Double Insulated
Eye protection should be
worn at all times when
using this tool.
Hard Hat - Head protection
should be worn at all times
whilst using this tool, to protect
from overhead hazards.
Ear protection / Ear defenders
should be worn at all times
whilst using this tool.
This tool exceeds 85dB(A).
Wear Dust Protection
Electrical enclosure -
risk of electric shock.
Read and understand
the instruction manual -
before operating this tool.
Warning
CE certification
ETL certification
5015027
WEEE - Waste Electrical &
Electronic Equipment. This
machine should be disposed of
as Electrical & Electronic Waste.
Triman - Waste Collection
& Recycling
(9.13)
INTENDED USE OF
THESE POWER TOOLS
• These power tools are intended to be used for
drilling holes with annular cutters and/or twist
drills in an industrial environment.
• These machines are designed to be held onto
a ferrous surface using the electromagnetic
base.
• These power tools should be used in a weather
protected environment, and be used with the
accessories provided by, or those recommended
by Evolution Power Tools.
• These power tools can be used vertically,
horizontally and in an inverted position,
provided the magnetic adhesion and work
environment allow.
9
Fuse
EN
ES
FR