Declaration Of Conformity - Evolution EVOMAG 28 Manuel D'utilisation

DECLARATION OF CONFORMITY

The manufacturer of the product covered by this Declaration is:
Evolution Power Tools, Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
The manufacturer hereby declares that the machine as detailed in this declaration fulfils all
the relevant provisions of the Machinery Directive and other appropriate directives as detailed
below. The manufacturer further declares that the machine as detailed in this declaration, where
applicable, fulfils the relevant provisions of the Essential Health and Safety requirements.
The Directives covered by this Declaration are as detailed below:
2006/42/EC.
Machinery Directive.
2004/108/EC. Electromagnetic Compatibility Directive.
2014/30/EU.
Electromagnetic Compatibility Directive.
2011/65/EU.
The Restriction of the Use of Certain Hazardous
Substances in Electrical Equipment (RoHS) Directive.
2002/96/EC as The Waste Electrical and Electronic Equipment (WEEE) Directive.
Amended by
2003/108/EC.
And is in conformity with the applicable requirements of the following documents
EN 55014-1: 2017 • EN 55014-2: 2015 • EN61000-3-2:2014 • EN61000-3-3:2013
EN61029-1:2009/A11:2010 • ISO 12100: 2010
The technical documentation required to demonstrate that the product meets the requirements of
directive has been compiled and is available for inspection by the relevant enforcement authorities,
and verifies that our technical file contains the documents listed above and that they are the correct
standards for the product as detailed above.
Name and address of technical documentation holder.
Signed:
Date:
Print: Matthew Gavins: Group Chief Executive.
01/03/16
30
www.evolutionpowertools.com