Publicité
Les langues disponibles
Les langues disponibles
For
, select the following directory/folder on
the Hama driver CD-ROM.
Afterwards, click
. Vista then displays the driver that was
found, e.g.
continue. The driver is loaded, and your SATA hard drive is
displayed for selection in the installation menu. Next parti-
tion your hard drive, if needed, and continue installing Vista
by removing the Hama Driver CD-ROM and then inserting
the Vista installation DVD.
Before you start installation, fi rst copy all data from the
directory
from the accompanying Hama
driver CD-ROM to an empty diskette in the main directory
(A:\). Please note that any hidden fi les or system fi les must
be made visible before copying. Refer to the operating
system manual or online help for instructions on how to
view such fi les.
The following fi les should have been saved to the diskette:
readme.txt
Sil3112r.cat
Sil3112r.inf
Sil3112r.sys
SilSupp.vxd
SilSupp.cpl
SIWinAcc.sys
TxtSetup.oem
Continue as described in the section I
Before you start installation, fi rst copy all data from the
directory
Hama driver CD-ROM to an empty diskette in the main
directory (A:\). Please note that any hidden fi les or system
fi les must be made visible before copying. Refer to the
operating system manual or online help for instructions on
how to view such fi les.
. Click
to
.
on the accompanying
The following fi les should have been saved to the diskette:
readme.txt
TxtSetup.oem
\ext64\
with the fi les
Si3112r.cat
Si3112r.sys
Si3112r.inf
SilSupp.vxd
SilSupp.cpl
SiWinAcc.sys
Continue as described in the section
Begin with the installation of your operating system. During
installation, you will see the message:
the F6 key->
. Press the key, when prompted to do
so. Insert the created driver diskette into your fl oppy-disk
drive and then press ->
will see a selection menu:
operating system. Press ->
copy the required drivers. Now, install the operating system
as described in the instructions. Remove the created driver
diskette from the disk drive before restarting your system.
Begin with the installation of your operating system. During
installation, you will see the message:
F6 key->
. When prompted to do so, confi rm by pressing
-> . Insert the created driver diskette in your fl oppy-disk
drive and then press ->
see the following choices:
driver for your hardware architecture. Now, press ->
again. Setup will now copy the required drivers. Now, install
the operating system as described in the instructions. Re-
move the created driver diskette from the disk drive before
restarting your system.
Now press
. In the next window you
or
. Select the driver for your
again. Setup will now
Now press the
. In the next window, you will
or
; select the correct
7
Publicité
