Enerpac SQD-I Série Guide D'instructions page 3

WARNING: To avoid personal injury, keep
hands away from reaction arm and working
area during operation. See also
CAUTION: Incorrectly connected
hoses cause malfunctions and are
hazardous. See
not change coupler positions on
wrench equipment. Clean coupler
halves before connecting. Use dustcaps after
disconnecting.
IMPORTANT: Enerpac THC-700
series 3,5:1 safety twin hoses
must be used with double-acting
torque wrenches.
IMPORTANT:
hydraulic equipment by the
hoses or swivel couplers. Use
the carrying handle or other
2
means of safe transport.
2
CAUTION: Do not use worn or damaged
sockets or Allen-Key drives. They must fit
precisely on the nut or bolt being torqued. Do
not use metric size sockets or Allen-key drives
on imperial bolts and nuts or reverse.
WARNING: Use only Heavy Duty
Impact sockets for power driven
machine wrenches, according to
ISO-2725 and ISO-1174; DIN
3129 and DIN 3121, or ASME-B107.2/1995.
13
(page 6).
10
on page 6. Do
Do not lift
3
3
WARNING:
the square drive to prevent the socket from
slipping off.
4
1
CAUTION:
Allen-key drives (8) must be used when
inserting the Allen-key drive (7) for socket head
cap screws.
WARNING:
maximum torque of Allen-key
drives to avoid danger of Allen-key
drive failure and bolt-shearing.
Maximum torque of Allen-key drives are
specified in tables
WARNING:
maximum torque for a bolt size or
Allen-key drive will result in bolt
shearing
failure. These failures could result in bolt or
insert pieces being projected from the wrench
or bolting site. Failures will also result in the
3
Always secure the socket to
4
+ . The reaction arm for
Do not
A1 A2
and .
Exceeding
and potential
exceed
the
parts