Chauvet Professional COLORdash Accent Série Mode D'emploi page 9

Mounting
Orientation
Rigging
Procedure
Product Mounting
Diagram
COLORdash™ Accent Series User Manual Rev. 4
Before mounting any of the fixtures in the COLORdash™ Accent Series, read and follow
the safety recommendations indicated in the Safety Notes section (page 2 of this
manual). Use at least one mounting point per product. Make sure the mounting clamp
(such as CLP-15 from CHAUVET®) is capable of supporting the weight of the product.
For our CHAUVET® line of mounting clamps, go to
clamps-main.html.
Always mount the fixtures in the COLORdash™ Accent Series in any safe position while
making sure that there is adequate room around it for ventilation.
Make sure to mount these fixtures away from any flammable material as indicated in the
Safety Notes section.
CHAUVET® recommends following the general guidelines below when mounting any of
the fixtures in the COLORdash™ Accent Series.
·
When selecting an installation location, consider ease of access to the fixture for
operation, programming adjustments, and routine maintenance.
·
Never mount any of these fixtures in places where rain, high humidity, extreme
temperature changes, or restricted ventilation may affect it.
·
If hanging any of these fixtures, make sure that the location where you are mounting
the fixture can support its weight. Please see the Technical Specifications section of
this manual for the weight requirement of this fixture.
The fixtures in the COLORdash™ Accent Series come with a double-bracketed yoke to
which you can attach your mounting clamps. The double-bracketed yoke also serves as a
floor mount support. You must supply your own mounting clamps as well as the safety
cable.
Truss Mount
www.chauvetlighting.com/cables-
Mounting Clamp
(not included)
Floor Mount
Setup
-7-