Led Indicators; Sd Card Slot - Axis Q3517-SLVE Mode D'emploi

AXIS Q3517-SLVE Network Camera
Specifications
To find the latest version of the product's datasheet, go to the product page at axis.com and
locate Support & Documentation.

LED Indicators

Note
• The Status LED can be configured to flash while an event is active.
Status LED
Unlit
Green
Amber
Amber/Red
Status LED behavior and buzzer signal for leveling assistant
For information on the function button used for leveling the image, see page 19.
Press and hold the function button (2) for more than two seconds to level the camera.
• When the camera is level, both LEDs are steady green, and the beep is continuous.
• When the camera is not level, the LEDs flash a combination of red, green and orange, and
the beep occurs at slow intervals.
Both LEDs briefly flash green to indicate that the leveling is getting better.

SD card slot

NO NO TICE NO TICE TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when
inserting or removing the SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product
is running. Unmount the SD card from the product's webpage before removal.
This product supports microSD/microSDHC/microSDXC cards.
For SD card recommendations, see axis.com.
Indication
Connection and normal operation.
Steady green for 10 seconds for normal operation after startup
completed.
Steady during startup. Flashes during firmware upgrade or reset
to factory default.
Flashes amber/red if network connection is unavailable or lost.
18