Trouble Shooting - Tineco A11 Série Mode D'emploi

Trouble Shooting

Problem
The appliance doesn't work
Weak suction power
Abnormal motor sounds
Battery can not be charged
Red light blinking, main
body continues working
while the brush stops
One blinking red light
One blinking pink light
Note:
If the above solutions can not solve the problem, please contact us at support@tineco.com
or visit our website www.tineco.com for further support.
Possible cause
No power
The suction mouth is blocked
Dustbin and filters are full of dust
The brush roller is wrapped
by hairs or
fibers
The pre filter is not installed.
The appliance is blocked
(such as tube, suction mouth or
some other part)
The appliance is blocked
(such as tube, suction mouth or
some other part)
The battery is not correctly placed
The brush is blocked
Out of power, or the battery is
overheated, or the appliance
is blocked
The filters or the suction mouth
is blocked
15
Solution
Charge the battery
Check and remove blockages
Empty and clean dustbin and
filters
Clean the brush roller
Install the pre filter
Remove blockages
Remove blockages
Remove the adaptor and insert
again
Stop the appliance and clean the
brush roller
Charge the battery, or cool down
the battery, or remove blockages
Clean filters or remove blockages