Cleaning And Maintenance - Joyello KLACK JL-988 Mode D'emploi

GB
Only the car's 3-point safety belts must be used to secure the baby seat.
Step 1: Remove the backrest from the booster (Fig. 1)
Step 2: Place the booster in the passenger seat by securing it properly (Fig. 2).
Step 3: Place the child on the booster with his/her back against the backrest of the car (Fig. 3).
Step 4: Place the lap belt below the armrest of the car and secure your child with the lap belt (Fig. 4).
Cleaning of the cover: use only neutral detergent and wash with hot water. Do not machine wash.
Spinning cycle and dryer are not recommended.
Wash cold water 30°
Suitable for dry cleaning in
Tetrachloroethylene
Do not bleach
Do not tumble dry
Do not iron
WARNING IN CASE OF ACCIDENT: The car seat should be replaced if the vehicle has been subject
to accident violent stress.
Specifications and designs are based on the last information available at the time of printing and subject to change without notice.
12
USE FOR GROUP III

CLEANING AND MAINTENANCE