Dichiarazione Di Conformita - WAMGROUP VCP R03 Série Mode D'emploi

Declaration Of Incorporation Of Partly Completed Machinery Annex II B 2006/42/CE Directive
of the European Parliament and the Council of 17 May 2006 on machinery
1.1.1. - Definitions
1.1.2. - Principles of safety integration
1.1.3. - Materials and products
1.1.5. - Design of machinery to facilitate its handling
1.3.1. - Risk of loss of stability
1.3.2. - Risk of break-up during operation
1.3.3. - Risks due to falling or ejected objects
1.3.4. - Risks due to surfaces, edges or angles
1.3.7. - Risks related to moving parts
1.3.8. - Choice of protection against risks arising from moving parts
1.3.9. - Risks of uncontrolled movements
1.5.4. - Errors of fitting
1.5.5. - Extreme temperatures
and, where applicable, the requirements imposed by the following EC Directives
Directive 2004/108/EC of the European Parliament and the Council of 15 December 2004 on the approximation of the laws
of the Member States relating to electromagnetic compatibility.
Directive 2006/95/EC of the European Parliament and the Council of 12 December 2006 on the approximation of the laws
of the Member States relating to electrical equipment designed for use within certain voltage limits.
The relevant technical documentation is compiled in accordance with Annex VII B
Harmonized standards, national standards and technical regulations in question:
The signing company is committed to provide, in response to a reasoned request by national authorities, relevant informa-
tion on products covered by this declaration, without prejudice to the rights of intellectual property of the manufacturer. The
information will be transmitted directly to the national authorities having requested.
It's forbidden to operate all these products before the machine, in which they will be installed, is declared in con-
formity with 2006/42/EEC AND SUBSEQUENT AMENDMENTS
The person authorized to provide
the technical documentation:
Vainer Marchesini
WAMGROUP S.p.A. - Strada degli Schiocchi, 12 - I-41100 Modena (Mo) - Italy
- DECLARATION OF CONFORMITY
- KONFORMITÄTSERKLÄRUNG
VCP
- DECLARATION DE CONFORMITE
Series R03
-

DICHIARAZIONE DI CONFORMITA'

The manufacturer:
WAMGROUP S.p.A.
Strada degli Schiocchi, 12 - I-41100 Modena (Mo) - Italy
under its own responsibility declares that:
VCP Series R03
comply with the RES Directive 2006/42/EC
of the Machinery Directive 2006/42/EC
EN ISO 12100-1: 2005 EN ISO 12100-2: 2005
Strada degli Schiocchi, 12 - I-41100 Modena (Mo) - Italy, 01.01.2010
located in
1.5.6. - Fire
1.5.7. - Explosion
1.5.8. - Noise
1.5.9. - Vibrations
1.5.13. - Emissions of hazardous materials and substances
1.5.15. - Risk of slipping, tripping or falling
1.6.1. - Machinery maintenance
1.6.2. - Access to operating positions and servicing points
1.6.4. - Operator intervention
1.6.5. - Cleaning of internal parts
1.7.1. - Information and warnings on the machinery
1.7.2. - Warning of residual risks
1.7.4. - Instructions
VAL.120.--.M.4L
The legal representative:
Vainer Marchesini
04.12
2
36