Samsung HW-S60T Manuel De L'utilisateur page 13

• When the TV sound is not output, press the
Soundbar or the
mode. The "Digital Audio In" mode changes to "TV ARC" and the TV sound is output.
• When it does not switch to "TV ARC", check the HDMI cable connection status again.
• Use the volume buttons on the TV's remote control to change the volume on the Soundbar.
NOTES
• When you connect the TV that supports the HDMI ARC (Audio Return Channel) to the Soundbar
with an HDMI cable, you can transmit the digital video and audio data without connecting a
separate optical cable.
• We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one
whose diameter is less than 14 mm.
• This function is not available if the HDMI cable does not support ARC.
• When the audio in a broadcast is encoded in Dolby Digital and the "Digital Output Audio Format" on
your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the
setting on the TV is changed, you will experience better sound quality. (The TV menu may use
different words for Dolby Digital and PCM depending on the TV manufacturer.)
(Source) button on the remote control to select the "Digital Audio In"
ENG - 13
(Multi Function) at the top of the
button