RAIS/attika NEXO GAS Notice D'installation page 233

ARRANGING CERAMIC "LOGS" AND THE EMBERS LAYER
Arranging ceramic "logs" and the embers layer
Below you can see the different ceramic "logs" that are used specifically with your fireplace. Identify
the different logs and then follow the guide's instructions in how to position them correctly.
NB!
It is very important that you follow the instructions for positioning the ceramic "logs" and
embers layer very precisely.
Please note that there should be a small intermediary space between the "logs" that lie on the
burners and between the surrounding logs, so there is space for the flames in between them.
If there is not space for the flames, the fireplace will not burn optimally and soot may form.
Nexo Gas - Viva L Gas - Q-Tee 2 Gas - Q-Tee 2 C Gas
You will find these ceramic logs in the package:
2
1
A
3
B
5
4 6
GB - 47