Polaris 360 Mode D'emploi page 5

Installing Other Pool Connections
1" Stub Pipe Connection Kit
If the pool does not have a dedicated return line, the Polaris 360 connects to most common (part #9-100-8002)
return lines using special adapter kits available for purchase at a participating Polaris dealer.
For pools with plastic-pipe return lines (without pipe threads) that are cut off flush
with the pool wall:
If pipe is 1" in diameter, use
1" Stub Pipe Connection Kit
(part #9-100-8002)
1" Return Line
1-1/2" Stub Pipe Connection Kit
(part #9-100-8003)
1" Expansion
Connector
If pipe is 1-1/2" in diameter, use 1-1/2" Stub Pipe Connection Kit
(part #9-100-8003).
1-1/2" Return Line
1-1/2"
Eyeball Adapter Connection Kit
Expansion
Connector (part #9-100-8005)
For directional eyeball fittings that do not have a 1-1/2" threaded socket, request the
Eyeball Adapter Connection Kit (part #9-100-8005).
Wall Fitting
Retainer
Adapter
Ring
These are the most common, but not all of the possible pool connections.
If the UWF and Eyeball Regulators still cannot be installed on the pool, contact your
dealer or Customer Service to determine which parts may be necessary.
Other Connections Requiring Special Fittings
If a spa is connected to the pool filtration equipment, obtain expansion regulators in addition
to one of the kits listed above. Contact your dealer or Customer Service to determine which
parts may be necessary.
1-1/4" Sleeve Kit
(part #8-841-00)
If pipe is 1-1/4" in diameter, order 1" Stub
Pipe Connection Kit (part #9-100-8002)
and 1-1/4" Sleeve Kit (part #8-841-00).
1-1/4" Return Line
Does current fitting
look like this?
Connector
Head
www.polarispool.com
1-1/4" Sleeve
Not included with kit