Overheating Protection; Technical Data - Clatronic HL 2994 Mode D'emploi & Garantie

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
Controlling Room Temperature
GB
Turn the thermostat control knob to the highest level. The LED will light up.
Once the desired room temperature is reached, turn the thermostat control
knob slowly back until the device shuts off. The thermostat maintains the set
room temperature by switching the device on and off.
Cold air operation
If you would like to use the device as a ventilator please move the function switch
to the ventilator symbol and turn the temperature control to the highest position.
The device is equipped with an overheating protection that switches the device
automatically off in case of overheating. Shift the function switch to „O" position
and pull out plug out of the socket. Let the device cool down for about
10 minutes before using it again.
Should the overheating protection shut the device off again shortly after, there
is probably a defect. Switch off the device again and pull out the plug. Let the
device be checked by an authorized dealer or by our customer service (or
contact your dealer).
Before cleaning the machine you should always remove the mains lead and
wait until the machine has cooled down. The machine should only be cleaned
with a slightly damp cloth.
Do not use any strong detergents or solvents for cleaning.
Model: ......................................................................................................... HL 2994
Power supply: ....................................................................................... 230 V, 50 Hz
Power consumption: ................................................................ max. 1800 – 2100 W
Protection class: ..................................................................................................... ΙΙ
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
38

Overheating Protection

Cleaning

Technical Data

Publicité

Table des Matières
loading

Table des Matières