Listening To The Radio; Storing Manually; Using Radio Data System (Rds) - Sony DSX-M50BT Mode D'emploi

Listening to the Radio

Listening to the Radio
Tuning step setting is required (page 10).
To listen to the radio, press SOURCE to select
[TUNER].
Storing automatically (BTM)
1
Press MODE to change the band.
2
Press and hold SELECT (FM1, FM2,
FM3, AM1 or AM2).
The setup display appears.
3
Rotate the control dial to select
[BTM], then press it.
The unit stores stations in order of
frequency on the number buttons.
Tuning
1
Press MODE to change the band
(FM1, FM2, FM3, AM1 or AM2).
2
Perform tuning.
To tune manually
Press and hold SEEK +/– to locate the
approximate frequency, then press SEEK
+/– repeatedly to fine adjust to the
desired frequency.
To tune automatically
Press SEEK +/–.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.

Storing manually

1
While receiving the station that you
want to store, press and hold a
number button (1 to 6) until [MEM]
appears.
Receiving the stored stations
1
Select the band, then press a
number button (1 to 6).
Using Radio Data System
(RDS)
Selecting program types (PTY)
Use PTY to display or search for a desired
program type.
1
Press PTY during FM reception.
2
Rotate the control dial until the
desired program type appears,
then press it.
The unit starts to search for a station
broadcasting the selected program type.
13
GB