Klarfit Relaxbike 6.0 SE Mode D'emploi page 44

EN
6
A) Fix the Handlebar (35) to the Front Post (26) and tighten with 1x Cover of
handlebar(20), 1x Washer (19), 1x Spacer (18) and 1 x T Knob (17). Get the Middle
pulse wire (32A) through the powder A (21) , pull up from the middle of Front Post (26).
B) Press the powder A (21) into the tube, as picture 1.
C) Connect the Computer wire B and 22, A and 32A, as picture 2. Then align Computer
(29) into the Front post (26). Tighten with 4x Screw (30).
44