Klarfit Relaxbike 6.0 SE Mode D'emploi page 42

EN
5.1
A) Take the Front Post (26) and join the Middle Computer Wire (22) with Lower
Computer Wire (40). Pull Lower Tension Cable (67) from Front post (26) and out from
the hole on the upside, then connect the Lower Tension Cable (67) with Tension Cable
(31), like the arrow direction. Then fasten the Tension Knob by 1x Curve Washer (24) &
Screw (25).
B) Pull the Cover for front post (28),then insert the Front Post (26) into Front Main
Frame (27), tighten with 4x Allen Bolt (23) and 4x Curve Washer (13).
Note: Please turn the resistance tension to level 8 before assembly.
42