Napoleon CLEARion Elite NEFBD50HE Manuel D'installation Et D'opération page 13

G.
Mark the holes for the mounting bracket. Ensure the marked holes are on opposite sides, as the brackets
cannot be mounted on the same side (Fig. 2-3).
H.
Drill marked holes and secure the mounting brackets with screws (supplied).
I.
Locate the appliance to the opening and position so that the hard wiring connections can be made (see
"hardwiring" section).
J.
Locate the appliance fully into the opening and position against the mounting brackets. Align the bracket
screw hole with the slots in the side of the appliance and screw through the slots to secure the appliance
into the mounting brackets. Repeat on opposite side (Fig. 2-4).
NOTE: Screws go into
RIGHT side of appliance.
K.
Install media (see "media installation" section).
L.
Reinstall front glass and front trim (see "front glass removal / installation" and "front trim removal /
installation" sections).
Repeat on
opposite side.
installation
Fig. 2-3
B x 4
Fig. 2-4
W415-2107 / D / 04.15.20
EN
13