Notes On Transport And Storage; Electrical Connection; Connection Examples - Resol SBS 2000 Traduction De La Notice Originale

ATTENTION! Damage to the device through overheating!
During operation, the pump motor can reach a temperature of
up to 70 °C.
Î Make sure the air supply for motor cooling is not
blocked!
1.2

Notes on transport and storage

Store the product at an ambient temperature of 0 ... 40 °C and in dry interior
rooms only.
ATTENTION! Damage through freezing!
Freezing can lead to damage of the filling and flushing station!
Î Make sure the station is stored in a frost-protected
place.
Î Make the pump does not contain any fluid.
Note
Only transport the filling and flushing station in a horizontal position and
when it is empty.
2

Electrical connection

The cross-section of the connection cable must be at least 1.5 mm².
Note
For your own safety: only use the filling and flushing station in an electri-
cal circuit fused by a residual current device.
3

Connection examples

Flushing hose
Pressure
hose
Filling and flushing station Filling and flushing unit
15