Turning The Camera On And Off; Taking Photos - LEXIBOOK DJ040 Série Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

go back to the installation menu. Now you can install the camera driver.

2. Click "Install Driver", and then follow the instructions to install the camera

driver.

3. You will need to reboot your computer after the driver installation. The

"MegaCam" driver allows you to use your digital camera as a webcam.

Note:

• If the CD does not auto run, click "Start", "Run", then type in "D:\autorun.

exe" in the Run dialog text box (where D:\ is your CD-ROM drive) and press

Enter.

• You must install the driver before downloading pictures/videos from the

camera or using it as a webcam.

• Make sure the camera is not connected to your computer before installing

the driver and the software.

• When launching the "PhoTags Express" software for the first time, a

registration dialog box is displayed on-screen. You can choose to register

the program, skip the registration process or to stop displaying this dialog

box again.

NOTE: Before using this product for the first time, remove the static label

from the LCD screen.

1. Press and hold the Power/Menu button (6) until the LCD screen lights up.

The camera will make a "beep" sound to confirm that it is ready for use.

2. Press and hold the Power/Menu button (6) for about 3 seconds again to

turn the camera off.

Note: The camera will auto power off after 60 seconds of inactivity.

You are already in camera mode when you switch on the unit:

1. Press the Shutter button (5) to take a photo. The LED lights up, then the

number of pictures stored in memory is shown on the LCD screen.

2. To check the number of pictures you took, the battery level, the photo

resolution and quality, press the Power/Menu button (6) once in camera

DJ040seriesIM0119.indd 16

Click "Install PhoTags Express" and

follow the instructions to install

"PhoTags Express" and "WebCam

Express". "PhoTags Express" and

"WebCam Express" software offer

many applications for photo editing

and printing. When the installation is

completed, a confirmation window will

be displayed. Untick the "Start the

application" option and click the

"Finish" button to close the window and