Turning The Camera On And Off; Single Shooting; Continuous Shooting - LEXIBOOK DJ023 Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
1. Press the "Power/Mode" key to turn the camera on. The camera will make a
"beep" sound to confirm that it is ready for use.
2. Press and hold the "Power/Mode" key for a few seconds again to turn it off.
Note: The camera will auto power off after 30 seconds of inactivity.

Single shooting

You are already in "Single shooting" mode when you switch on the camera (the
icon is displayed on screen). Press the Shutter key to take a photo. The number of
pictures that you can take in memory is shown on the LCD screen.

Continuous shooting

1. When you are in "Single shooting" mode, press the "Power/Mode" key once.
2. Then press the Shutter key repeatedly until the "Continuous shooting" mode
icon is displayed on the screen.
3. Press the Power/Mode" key once again to go back to camera mode then press
the Shutter key to take 3 pictures continuously.
4. To go back to "Single shooting" mode, repeat steps 1 and 2 above pressing
repeatedly the Shutter key until the
"Power/Mode" key to go back to camera mode.
Note: The flash is disabled in "Continuous shooting" mode.
To use the flash, repeatedly press the "Down" key until your desired setting is shown
by the icon on the screen:
16

TURNING THE CAMERA ON AND OFF

TAKING PHOTOS (Camera Mode)
icon is displayed on screen. Then press the
FLASH FUNCTION
Flash is on
Automatic flash is on
Flash is off

Publicité

Table des Matières
loading

Table des Matières